sqegg.com
工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
豫信致诚机械设备(南京市分公司)本着“以质求信，以质求发展，互惠互利，共谋发展，携手共创，”。以质量求生存，以客户满意为指针，为用户着想，满足客户的一切需求，公司秉承“创新、、求实、奋进”的经营理念，努力打造 软管泵精英品牌。
众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。
It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.
